Redline Custom Equipment

Cleanable Filters Offer Absolute Filtration-No Bypass!

 

MP2000RS Transfer System

Strainers and Filters

Cleanable Filter Systems

Gas Driven 25 GPM Pump

Hose and Nozzles

Low Cost Pumps-MP2000DD

15 Gallon Drain Pan

Heavy Duty 1HP MP4000EX

Filter Pump MP3000EXHF

Heavy Duty 12 Volt Pumps

This is the 10 micron cleanable waste oil filter system. It features an aluminum filter head, bracket, the filter itself, and 3/4" hose barbs. The 10 micron element is great for filtering your WVO. The 10 micron element has an absolute rating. We also have a 30 micron element for this filter that can be used with the same housing. All the oil goes through the filter element-there is no bypass! This filter can be used on our MP2000-MP3000 waste oil filtration system. It spins on the same filter head as the replaceable filter elements. It can also be used with other pumps remotely. This filter system should be used on the suction side of a pumping system unless the pump has an internal pressure relief system. To clean the filter element, you soak it in diesel and then blow compressed air through the steel mesh form the inside to the outside. This procedure should be done several times until the screen is clean. You can hold the element up to a light source to see if the element is free of debris. Call 1-605-881-3473 to order. These cost $189.00 + $10.00 shipping

We have different micron sizes of cleanable filters available. These are 30 micron and 10 micron. The 30 micron and the 10 micron filters use similar elements so the can be used with the same housing. One filter, 2 elements you can use. I would suggest using the 30 micron first and then a follow up with the 10 micron. The 10 micron filter is very fine. The stainless steel mesh feels like silk. This 10 micron filter should be used after the 30 micron so you won't have to clean it as much.  I highly suggest using a cleanable filter with our pumping systems.  --David L. Miller  1-605-881-3473

Our Cleanable 10 Micron/ 30 Micron Filter System with Filter, Mounting Head, Mounting Bracket, and 3/4" Hose Barbs, $189.00 + $10.00 Shipping. Call 1-605-881-3473 to order.
This filter system can be used with a 10 micron or a 30 micron cleanable element. They are interchangeable with this filter housing. The 30 micron works great for initial filtering and the 10 micron is a good final filter. Add $50.00 if you want the complete system with both elements.