MP2000DD Rotodel 10 GPM Heavy Duty 110 Volt Transfer Pump. $349.00 + $50.00 Shipping. Call 1-605-881-3473 to order.
Our MP2000DD Rotodel can be used to dispense a variety of liquids. It features our new Heavy Duty Rotodel10 GPM rotary gear head. It has 1/2" NPT ports in and out with 3/4" NPT adapters installed to accept the 1" hose barbs. This system is to be used with 1" ID hose. It can transfer used motor oil, diesel, biodiesel, waste vegetable oil, bulk oil, fuel oil, hydraulic oil, and motor oil. The MP2000DD works well with diesel, biodiesel, and fuel oil on up to 15w40. This unit works bestwith oils above 50 degrees in temperature. This model has an adjustable pressure relief system that allows the user to control the pressure the pump creates and allows the operator to use a trigger nozzle. Trigger nozzles are $50.00 and 1" oil resistant hose is $3.25 per foot. Suction wands are $35.00. Our 1" oil resistant hose kit which has two 10 foot hoses, a full set of cam lever quick couplers, and a suction wand w/16 mesh screen is $229.00 + $30.00 shipping. The hose kit is shown with the system in the photo below. The MP2000DD Rotodel is $349.00 + $50.00 Shipping.Call 1-605-881-3473 to order.-David L. Miller
MP2000DD Rotodel 10 GPM Waste Oil Transfer System with 1" Oil Resistant Hose Kit- $579.00 + $70.00 Shipping. Call 1-605-881-3473 to order.
Our MP2000DD Rotodel,shown here with our 1" oil resistant hose kit, makes oil transfer fast and easy. The hose kit eliminates the need to deal with hose barbs and clamps. And the high quality hose resists the harmful effects that petroleum based liquids have on typical hoses you get at a hardware store. A full set of cam lever quick couplers have male and female connections that hook together and clamp down. The hose ports and the pump ports have caps and plugs to keep oil from leaking out during transport. The MP2000DD Rotodel, which is similar to the MP3000RSG in design, features many similar heavy duty parts such as a Rotodel rotary gear head and a 1/3 HP 110 volt electric motor. The MP2000DD Rotodel is a 1/2" NPT port pump and the MP3000RSG is a 3/4" NPT pump. The biggest difference is the motor. The MP2000DD Rotodel has a Leeson 1/3 HP motor that spins at 1800 RPM. The MP3000RSG has a Baldor motor that spins at 1140 RPM. The MP2000DD is designed to transfer oil that is above 50 degrees in temperature and not heavier than 15w40 motor oil. The MP3000RSG is required when filtering large amounts of oil through fine micron filters, when transferring cold oil below 50 degrees in temperature, or transferring heavy oil like gear lube. The MP2000DDRotodel is a direct drive pump. The motor and the pump run at the same speed. This system works well with fluids such as diesel, WVO, motor oils, antifreeze, and biodiesel. The oil should be above 50 degrees in temperature when using the MP2000DD Rotodel. This pump has an internal pressure relief system (pressure output up to 100 PSI) and can be used with filters or trigger nozzles. Filters should be mounted on the pressure side of the pump. Filters last longer on the pressure side. Pumps push better than they pull oil. This pump is perfect for users who have small to medium size quantities of waste oil, WVO, or diesel to transfer and need a pump that is self primeing, easy to use, and very dependable. It can transfer motor oil at up to 10 gallons per minute and diesel at 12 GPM. If used with an inverter, you will need 3000 watts to run the pump. This system is $579.00.00 + $70.00 shipping. Call 1-605-881-3473 to order.-David L. Miller
MP2000DD Complete Waste Oil Filtration and Dispensing System. $449.00 + $50.00 Shipping. Call 1-605-881-3473 to order.
This is the MP2000DD Complete Waste Oil Filtration System which features the MP2000DD transfer pump, a 180micron cleanable strainer inside of a clear bowl with a drain valve, 10 feet of suction hose, 10 feet of oil resistant pressure hose, a 42" suction wand with 400 micron debris screen, and hose clamps. This system is $449.00 + $50.00 shipping. Call 1-605-881-3473 to order.