MP2000DD Dayton 10 GPM Heavy Duty 110 Volt Transfer Pump. $545.00 + $60.00 Shipping. Call 1-605-881-3473 to order.
Our MP2000DD Dayton transfer pump can be used to dispense a variety of liquids including bulk or waste oil.It features our new Dayton 1/3 HP Electric Motor and aHeavy Duty10 GPMrotary gear head. It has 1/2" NPT ports in and out and comes with 1" hose barbs.This system is to be used with 1" ID hose. It can transfer bulk or waste motor oil, diesel, mineral oil, biodiesel, waste vegetable oil, silicone oil, fuel oil, hydraulic oil, and synthetic motor oil. The MP2000DD works well with diesel, biodiesel, and fuel oil on up to 15w40. This unit works bestwith oils above 40 degrees in temperature.This model has anadjustable pressurerelief system that allows the user to control the pressure the pump creates and allows the operator to use a trigger nozzle. Trigger nozzles are $50.00 and 1" oil resistant hose is $6.00 per foot. Suction wands with debris screens are $45.00. Our 1" oil resistant hose kitwhich has two 10 foot hoses, a full set of cam lever quick couplers, and a 42" suction wand w/16 mesh screen is $285.00 + $45.00 shipping. The hose kit makes using the system much easier and avoids oil spillage. Each port on the pump and the hoses has a plug or a cap to keep oil from leaking out during transport. A very good investment. Buy the hose kit if your going to move the pump from place to place to collect oil. The MP2000DD Baldor is $545.00 + $60.00 Shipping.Call 1-605-881-3473 to order.-David L. Miller
MP2000F Waste Oil Transfer/Filtration System w/10 Micron Filter and Bypass Valves. $645.00 + $75.00 Shipping. Call 1-605-881-3473 to order.
This is the MP2000F Dayton Waste Oil/Bulk Oil Transfer/Filtration Systemwhich features the MP2000DD transfer pump, a 10 micron spin-on filter system with mount, a dual ball valve filter bypass system, 1" hose barbs and hose clamps. Add $25.00 for a pressure gauge. This system can be used to transfer bulk or waste oil, collect oil, or to filter it. This unit works best with oil that isabove 40 degrees in temperature. By setting the ball valves on or off you can run oil through the filter or choose to bypass it. This feature makes it easy to go from filtration system to transfer system in just seconds. Filters for thissystem can be purchased at most auto parts stores! We sell them for $17.00 each. This transfer system has a 1/2" port heavy duty cast iron pumping unit that features an adjustable pressure relief system. There is a bolt on the back of the gear head that can be turned in or out to set the pressure higher or lower. This system has a max pressure of 100 PSI. This high pressure ensures you will get longer life out of the replaceable element filters. Accessories for this system are the 42" suction wand with 16 mesh screen for $45.00, 1" oil resistant hose for $6.00 per foot, or a cleanable suction strainer for $185.00. The suction strainer is a good idea if your sucking oil from a container that prohibits the use of a suction screen. A complete 1" oil resistant hose kit is $285.00 and includes two 10 foot hoses, a complete set of cam lever quick couplers, and the 42" suction wand. Additional steel adaptors are required for the hose kit which adds $50.00 to the cost of the system. This system as shown is $645.00 + $75.00 shipping. Call 1-605-881-3473 to order.
This is our MP2000F Dayton Complete Waste Oil/Bulk Oil Filtration System which is similar to our MP2000F filtration system. This system comes the MP2000DD transfer pump, a 10 micron filter system w/mount, a dual brass ball valve filter bypass system, 10 feet of 1" oil resistant hose, 10 feet of 1" suction hose, clamps, and a 42" long suction wand w/16 mesh screen. For the optional pressuregauge, add $25.00. Filters for this system can be purchased at most auto parts stores.
This system is $745.00 + $90.00 shipping. Call 1-605-881-3473 to order.