The MP3000EX Heavy Duty Transfer/Filtration Pump Features a 1 HP Leeson 110 volt motor and a 3/4" Port Heavy Duty 3/4" Port Rotary Gear Head. This system is $899.00 + $100.00 shipping. Call 1-605-881-3473 to order or for technical questions. -David L. Miller
Here is our MP3000EX transfer pump which features a Leeson 1 HP 110 volt motor coupled to a heavy duty 3/4" port rotary gear head. This pump has an adjustable pressure relief system which makes it capable of running in bypass. The standard port size for the MP3000EX is 3/4". It is adapted up to 1" FPT with 1" hose barbs. It should be used with 1" ID hose minimum. These pumps are self priming and move oil at 20 GPM. It works best with oil that is above 40 degrees in temperature. For colder oil, see the MP4000RSG transfer pump. These pumps are $899.00 + $100.00 shipping. Call 1-605-881-3473 for orders or questions. David L. Miller
This is our MP3000EX-F Waste Oil Transfer/Filtration System featureing the MP3000EX transfer pump and a 10 micron "High Capacity" spin-on filter system w/gauge. This system is $1249.00+ $120.00 shipping. Call 1-605-881-3473 to order or for technical questions. -David L. Miller
TheRedline MP3000EX-Ffeatures a Powerful 1 HP Transfer Pumpalong with a "High Capacity"10 micron spin-on filter system. It has a 1 HP 110 Volt Industrial electric motorand thermal protection. It has a heavy duty 20 GPM3/4" port castiron pump with helical steel gears and adjustable pressure relief system that puts out 100 PSI. You can increase or decrease the pressure by turning an adjustment bolt. This filtration system features a 10 micron spin-on filter standard. It can also accept a water block filter if you need to remove water from your oil. These water block filters are available upon request. The cast aluminum filter head has a pressure gauge. The pressure gauge will help indicate when your filter is plugged with debris. There in no pressure relief system in the filter head itself so no unfiltered oil can get past the filter element. When the filter plugs, the pump will automatically go into bypass mode. It will create pressure against the filter until it is changed. With this system, you have the option of filtering or just transferring your oil. This is done by the use of 2 brass ball valves. One shuts the filter off and on and the other allows the flow of oil out of the pump to be sent to a bypass hose. The 10 micron filter elements for this system can be purchased at most auto parts stores. We sell them as well for $40.00 each. The 10 micron water block filters are $65.00 each. 3 Micron filters are $50.00 each. The motor draws 15.5 amps. This system is set up for use with 1" ID hose.We have 1" ID oil resistant hose for $6.00 per foot. We have a 42" long suction wand with a 16 mesh screen for $45.00. We also have aluminum trigger nozzles for $50.00. The standard MP3000EX-F as shown above is $1249.00 + $120.00 shipping. Call 1-605-881-3473 to order with your credit card.